Найновіші продукти
Зв'яжіться з нами
- 23 F, Будівля B, Zhong Tou Міжнародний Будівля, Ні .10 Джин Ви I Дорога, Високий - Технологія Зона, Xi'an, Шансі, Китай 710077
- info@vigorpetroleum.com
- +86-029-81161513
Vigor's sucker rod pump produced according to standard: API Spec 11AX, include Type: Rod Pump type and tubing pump type.
Опис
The standing valve, located at the bottom of the pump assembly, functions as a one-way check valve that allows fluid to enter the barrel while preventing it from flowing back into the reservoir. The traveling valve, positioned on the plunger, also acts as a one-way check valve, allowing fluid to flow upward through the pump as the plunger moves upwards.
1. Vigor's subsurface Rod Pump is strictly conforming to API SPEC 11AX standard.
2. Materials And Surface Treatment
(1) Materials: Vigor's products are manufactured using high-quality materials such as stainless steel, which provides excellent corrosion resistance. Additionally, we offer various coatings and liners to further enhance the pump's ability to withstand corrosive fluids. Rest assured that our pumps are designed to endure harsh environments and ensure long-lasting performance.
(2) Surface Treatment:
|
|
|
|
|
Carbon Steel, Chrome plate, nickel-phosphorous plate, |
||
|
Hard-lined |
※
|
|
|
|
|
|
|
|
|
20-125TH |
32(1.25) |
1.2-1.8 (4-6)
|
0.6-7.3 |
1.14 |
2-7/8NU/EU |
¾ |
|
20-125RHAC/M |
32(1.25) |
0.6-7.3 |
1.14 |
2-7/8NU/EU |
¾ |
|
|
20-125RHBC/M |
32(1.25) |
0.6-7.3 |
1.14 |
2-7/8NU/EU |
¾ |
|
|
20-125RHTC/M |
32(1.25) |
0.6-7.3 |
1.14 |
2-7/8NU/EU |
¾ |
|
|
25-125TH |
32(1.25) |
0.6-7.3 |
1.14 |
2-7/8NU/EU |
¾ |
|
|
25-150RHAC/M |
38(1.50) |
0.6-7.3 |
1.64 |
2-7/8NU/EU |
¾ |
|
|
25-150RHBC/M |
38(1.50) |
0.6-7.3 |
1.64 |
2-7/8NU/EU |
¾ |
|
|
25-150RHTC/M |
38(1.50) |
0.6-7.3 |
1.64 |
2-7/8NU/EU |
¾ |
|
|
20-150TH |
38(1.50) |
0.6-7.3 |
1.64 |
2-7/8NU/EU |
¾ |
|
|
25-150TH |
38(1.50) |
0.6-7.3 |
1.64 |
2-7/8NU/EU |
¾ |
|
|
20-175TH |
44(1.75) |
0.6-7.3 |
2.24 |
2-7/8NU/EU |
¾ |
|
|
25-175RHA/M |
44(1.75) |
0.6-7.3 |
2.24 |
27/8 |
¾ |
|
|
25-175RHB/M |
44(1.75) |
0.6-7.3 |
2.24 |
2-7/8NU/EU |
¾ |
|
|
25-175RHT/M |
44(1.75) |
0.6-7.3 |
2.24 |
2-7/8NU/EU |
¾ |
|
|
25-175TH |
44(1.75) |
0.6-7.3 |
2.24 |
2-7/8NU/EU |
¾ |
|
|
25-225TH |
57(2.25) |
0.6-7.3 |
3.69 |
2-7/8NU/EU |
¾ |
|
|
30-275TH |
70(2.75) |
0.6-7.3 |
5.50 |
3½NU/EU |
7/8 |
|
|
30-225RHC/M |
57(2.25) |
0.6-7.3 |
3.69 |
3½NU/EU |
¾ |
|
|
30-225RHC/M |
57(2.25) |
0.6-7.3 |
3.69 |
3½NU/EU |
¾ |
|
|
30-225RHC/M |
57(2.25) |
0.6-7.3 |
3.69 |
3½NU/EU |
¾ |
|
|
35-325TH |
83(3.25) |
0.6-7.3 |
7.70 |
4NU/EU |
7/8 |
|
|
40-375TH |
95(3.75) |
0.6-7.3 |
10.26 |
4½NU/EU |
1 |
1. Piston with traveling valve.
2. Inner working cylinder with fixed valve.
3. Conical lock buckle.
4. Suspended to the lower end of the oil pipe outside the working tube.
5. Types: Depending on the wall thickness of the barrel, it can be classified as either a thin wall rod pump or a thick wall rod pump.
1. Vertical wells: it is the most common type of artificial lift used in vertical wells.
2. Horizontal wells.
3. Deviated wells: They can also be used in deviated wells, but they require special modifications to the pump and rod assembly.
1. Relatively low cost: it is relatively inexpensive to purchase and operate.
2. Simple design: it is relatively simple to design and manufacture.
3. Wide range of applications: it can be used in a variety of wells.
Q: What materials are used in the construction of the pump, and are they corrosion-resistant?
After-sales service isn't restricted by time and we will assign technical personnel to solve your problems immediately after receiving telephone and hear feedback idea of users and deal with them in time.
Популярні Мітки:
Вам також може сподобатися
